Large size constant temperature incubator shaker Bioshaker GBR 200
Large size constant temperature incubator shaker Bioshaker GBR 200
Save your space with lift-up door and stackable, enable to use as laboratory table, culture large capacity
Main Application
●Incubating microorganism such as E. Coli●Incubating yeast and insect cells, psychrotroph
Features
Lift up door doesn't waste the front space
Upon door lift, it comes about 30cm forward
|
Energy saving operation function consumes 1/4 of power consumption
It saves energy by turning off freezer automatically when the setting temperature is 9ºC higher than environment.It can work as a side bench when it is not stacked
Comparison to a common experimental bench.
|
Stackable up to 2 levels
Even stacked, upper Shaking Rack is only about 113cm high.
|
Specifications
| Model | GBR-200 |
| Temperature Range | +4ºC - +80ºC |
| Temp. Control Accuracy | ±0.3ºC - 1.0ºC (*1) |
| Shaking Method | Switch Rotating / Reciprocal |
| Shaking Speed | 25 - 200rpm |
| Amplitude | Switch 25/50mm (*2) |
| Dimensions of stand | 700 x 500mm (chamber dimensions: 385mm) |
| Loading Limit | Approx. 10kg (exclude Shaking rack) |
| Door Style | Lift up door |
| Surroundings temperature | +5ºC - +35ºC |
| Heating System | Heater (700W) |
| Cooling | Freezer (130W) |
| Display (Temp. and speed) | Digital display |
| Programming Function | 4 pattern, 9 segment / temperature shaking speed time (for each segment) [time setting range: 00h00min - 99h59min], wait function (*3) |
| Safety device / function | Short/over current breaker, high temperature cutout switch, freezer high temperature cutting circuit, current limiter, overcurrent protection, fuse, filter check lamp, brake function on detection of shaking error, temperature error sensor, nonvolatile memory error, alarm for sample temperature protection (optional), door opening check, brake function on detection of motor overdrive (detection of abnormal pulse) |
| Dimensions | 1200 x 800 x 810Hmm (include top board) * dimensions of top board = 1200 x 750 x 25Hmm |
| Weight | Approx. 235kg (*4) |
| Power Supply | AC100V 12A (*5) |
| Standard Accessory | Universal shaking rack (MT-7050, clamp is option) x 1, Phillips x 1, spacer board (t1.0/t2.0) x 2 each, clamp for stacking (*6) |
(*1) Not include temperature change right after defrost function (electromagnetic valve switch) turned on.
(*2) 50mm on factory shipment. If you want to change, please call TAITEC service center.
(*3) Wait function is start shaking after reaching the desired temperature.
(*4) Since this machine is very heavy, please make sure the strength of floor.
(*5) Allowable voltage fluctuation is ±5% for AC100V.
(*6) Clamp for stacking will be attached for those who desire stack installation. Wheels are attached on deliver though they are just for carry and not attached.
(*2) 50mm on factory shipment. If you want to change, please call TAITEC service center.
(*3) Wait function is start shaking after reaching the desired temperature.
(*4) Since this machine is very heavy, please make sure the strength of floor.
(*5) Allowable voltage fluctuation is ±5% for AC100V.
(*6) Clamp for stacking will be attached for those who desire stack installation. Wheels are attached on deliver though they are just for carry and not attached.
●Since this machine is large and heavy, we will charge for deliver and install.
Dimensions
