Main Application

●Circulation to device which need temperature regulation at high temperature
●Quality test at high temperature using water bath

Features

EZ-101 for high temperature range

Heat insulated water bath has small heat loss and can be used stably at high temperature. Cooling pipe immersion part is set and use of Immersion cooler enables setting at below 0ºC without wasting water bath space.

External circulation with variable flow rate, watering surface is made of all stainless steel

It is optimum to circulate into precise device by variable flow rate. Since all watering surface is made of stainless steel, heat resistance and sanitary quality is improved.

Specifications

Model	EZ-101
Temperature Range	*+60ºC - +200 ºC ()**
Temp. Control Accuracy	±0.1ºC - 0.3 ºC
Pump ability(50/60kHz)	Max. Flow : 8/10L/min (variable) Max. lifting height : 4/5m
Heater output	1200W
Thermoregulation method	Pt. PID regulation (with auto tuning)
Minimum temperature setting unit	0.1ºC
Safety device / function	Short/ overcurrent breaker, fuse (3A), floating type boil without water protection (with protection of chattering), thermosense type boil without water protection, thermal switch for motor protection, high and low temperature protection of sample, freezer protection (approx. +40ºC, only for EZL-81F), diagnosis of temperature sensor error (disconnection/ short), diagnosis of low water level error, alarm for high and low temperature protection of sample, mixing inside water bath
Dimensions inside bath	170 x 300 x 145Hmm
Water bath volume (water level 80%)	Approx. 6L
Effective Dimensions inside bath	150 x 100 x 140Hmm
Dimensions	230 x 368 x 407Hmm
Weight	Approx. 15kg
Power Supply	AC100V 50/60Hz 13A

(*1) Temperature setting is available between -30ºC - +200 ºC. When setting temperature lower than RT, please use Immersion cooler together. There is special opening for Immersion cooler.

●When setting below +7ºC, please use antifreeze (see option)
●When setting around RT - +60ºC, please circulate cooling water (tap water) in cooling pipe. Temperature rise by work heat from mixing pump need to be minimized at below +60ºC.
●When setting above +70ºC, please use heating medium for high temperature (see option).
●Please do not use pure water or distilled water as heating medium. These may cause breakdown of machine.