Jual OD Monitor B & L Non invasive turbidity meter for culturing by rotary shaker

Harga: Call Us
OD Monitor B & L Non invasive turbidity meter

OD Monitor B & L Non invasive turbidity meter


New line up for OD-Monitor measurable OD while cultured as usual! It is for large Erlenmeyer flasks measurable high concentration. Automatic supply of IPTG at set value is possible with a pump unit.


Main Application

Cell density observation of bacterial in culturing
Cell density observation of pathogenic bacteria
Cell observation of bacillus in culturing under anaerobic conditions which gas concentration is important
Cell density observation of bacteria with slow multiplication rate
Cell density observation of floating mammals cell (scheduled)
Variation of inoculum culture
Effective protein’s mass production byE.Coli etc



Features

Saving of the turbidity measurement in culture with reasonable price

It automatically and untouched measure turbidity of rotating culture, such as coliform bacillus, in 100/200/300/500ml glass Erlenmeyer flask (volume is 1/5 amount ±10%, no Sakaguchi and no baffle). 


Use with our Bio Shaker (middle size or larger recommended)

It is used with incubator shaker BR series. You just only attach the sensor unit to the shaking rack. 

Four channels in maximum, The measurement value is converted to OD600 of the spectrophotometer.

It measure 4ch in maximum at the same time.
The measurement value is converted into 600 nm of the spectrophotometer (our BPM-10Bio).
It is possible to correct gap from the spectrophotometer. 



It alarms you when reached set OD by buzzer.

The control unit displays the present value and target value.
When exceeding target value, it is possible to alarm by buzzer.



Data is saved to USB memory.

Data is saved by text format to the flash memory of USB2.0 (some is not used). 
The edit with spreadsheet is possible.



Specifications and product configurations of this set

ModelOD-MonitorB&L
Component UnitControl unit :ODBox-B
Measurement unit :ODSensor-L
Temperature range of measurement+15ºC - +50ºC(Be careful of setting temperature of bio shaker.)
Applied Erlenmeyer flask and volume100/200/300/500ml flask made transparent glasses (no colored and no baffle), 1/5 volume±10% (*)
Shaking MethodRotating (It should shake on either of following conditions.)
Shaking speed and shaking amplitude100/120/150/160/180/200/240/250 r/min or 25/50mm (*)
(*) Set with ODBox-B at the beginning of measurement . OD-Monitor can be used only with TAITEC's incubator shaker BR series (current models ). Be sure to check shaking amplitude when you measure and ground both ODBox-B and a shaker for reducing electric noise.


Specifications of each product to configure this set

ModelODBox-B
Display of (OD) valueDisplay of converted values from transmitted light volume of infrared ray (950nm) to OD600 of E.coli bacteria
Measurement Range0.1 - 9.9(accuracy guarantee range 0.3 - 7.0)
Correction for biological species other than E. coli bacteria and gap from spectrophotometerEnter correction factors (0.01 - 2.55、initial value is 1.00)
Interval1/5/10/30/60/120/240min
Maximum Measurement TimeInternal memory : 360 points (*1)
USB memory : Up to USB memory
Maximum Connectable ODSensor-L4sets Measurement under all same conditions
Interface for external storage mediumPort for USB2.0 flash memory (*2)
Other FunctionsAlarm by buzzer when over target OD and activate pump (option)
Dimensions153 x 220 x 127Hmm
(*1)Point = Total measurement time / Interval. The 360th point figure is to updated when it exceed 360 points.
(*2)Some memory cannot be used with this unit even if it can be used with a personal computer.
The design and specifications are subject to change.


ModelODSensor-L
Measurement MethodHybrid OD, infrared light
Measurement Wavelength950nm
ConnectionOne set (use attached 0.5m flat cable )
Power SupplySupplied from ODBox-B (option)
Standard AccessoryFlat cable (2m) x 1
The design and specifications are subject to change.


Produk Terbaru Lainnya:

Share this product :