Centrifugal concentrator for well plate VC 96W
Centrifugal concentrator for well plate VC 96W
From microtube, Centrifuge tube to well plate. Addressed to various container which is used for analysis and so on. For mass processing.
Operation panel
Display elapsed time even at normal operation without timer (alternate display of hour and minute) "0H" means 0 hour. |
Main Application
●Dry-condensing DNA, RNA and protein●Dry-condensing of glycoprotein• sugar chain, peptide
●Spin down of fungi which is incubated in deep well
Features
Reduce condensing time by heater with high warm up efficiency
Normally especially for resinous container such as deep well plate, it is hard to complete sample condensation even after taking long time since heat conduction is very poor under decompression condition. This device adopted infrared heater which can provide enough calorie for condensation even under decompression and achieved reducing condensation time.With quality and safety system as full equipment centrifuge
Since centrifuging heavy deep well plate, lid adopted power lock as full equipped centrifuge machine. Heater is not turning on until revolution reach to setting value even main body switch is on to prevent bumping of sample. It turns off right after rotation stop button is pressed as well. Temperature control sensor and cutout for protecting overheat is independent so prevent trouble from breakage of temperature controller by any chance.Simple operation and flexible usability
Operation system is focused on usability and simplifies setting of revolution and timer. Releasing vacuum is manual so that precious sample is not fly loss by accident. Internal temperature which tends to increase by any means from consecutive operation can be monitored on temperature display panel.Can be address to various containers by exchanging rotor
In addition to microtubes and Centrifuge tubes, centrifugal condensation using deep wells which is a main feature of this product is available. Swing rotor 96S can centrifuge 350g loading on one side at 800×g and can be used to spindown of well plate and extraction of plasmid DNA other than centrifugal condensation.Specifications
| Model | VC-96W |
| Temperature Range | RT+5ºC - +65 ºC (setting range is 0ºC - +65 ºC) * heater turns on after reach to setting revolution |
| Rotation speed | 100 - 2600rpm (max. 800 x g; when using 96S rotor) |
| Rotating method | Magnet drive system |
| Timer | 1min - 99hrs 59min (digital) |
| Lid/ chamber material | Lid: PVC chamber: SUS304 (Teflon coated) |
| Gauge | 0 to -0.1MPa (Bourdon tube) |
| Vacuum release | Manual |
| Diameter of nozzle | ∅14mm |
| Eradication filter | 0.2μm |
| Other Functions | Outlet coupled with pump switch x 1 (up to 7A) * pump is on after reach to setting revolution |
| Safety device / function | Motor brake, protection for overheat, lid power lock (can open only at stop), heater/ rotation stop on lid open, various error display (blackout, motor rotation, fixed lock) |
| Dimensions | 380 x 486 x 369Hmm |
| Weight | Approx. 35kg |
| Power Supply | AC100V 4A (*) |
(*)Current may increase depend on usage of outlet for pump.
●Diaphragm vacuum pump is recommended.
Dimensions
